How To Clean Razer Blackwidow Chroma V2

Download Article

Download Commodity

Razer has a history of making high-quality reckoner keyboards, including the Blackwidow and its variants. One thing many people find is that it requires a lot of cleaning as hairs, gunk, and dust are highlighted by the keyboard's LED lights. Later on properly disassembling your keyboard, you can apply rubbing alcohol, cotton swabs, pressurized air, and plain water to make your keyboard and its lights smooth like new!

Things You Should Know

• Before removing the keys from your keyboard, snap a quick photograph then you remember their placement.
• Remove the keycaps earlier cleaning them to avoid getting the keyboard assembly wet.
• While soaking the keycaps in warm h2o, use a can of compressed air and/or a cotton swab with rubbing alcohol to remove dirt and debris from the main keyboard associates.

1. 1

   Take a movie of your keyboard to see where each primal is placed. After on, yous will accept to accept out each private central cap and put them dorsum in the right spot. Take a pic of your keyboard before you lot begin and then yous know the proper location for each cardinal.^[ane]

   • While yous tin reference photos online or consult your user manual to figure out the correct locations, a picture lets you can see the divergence before and after cleaning.

2. ii

   Unplug the keyboard and turn off any lights before you begin cleaning. Blackwidow keyboards take dazzling light displays, but these tin can be damaged if you lot leave the ability on as you lot clean. Plow off all the settings on your keyboard and unplug it from your figurer to prevent shorting or dissentious your keyboard's lights.^[2]

   Ad

3. 3

   Remove letter and number keycaps by pulling them off their base. All foursquare-shaped keys on your Blackwidow can exist removed but by pulling the cover directly upward to dislodge them from their bases. You may need to wiggle the key covers a little bit to get them off, simply only pulling upwards should practise the trick.^[3]

   • Don't curve the keys every bit you pull them, as this tin damage the connection. Pull the keys directly up to dislodge them, revealing plus-sign-shaped holdings.

4. 4

   Remove any hinged keys, such as the spacebar, shift and enter keys. These hinges prune keys to the board, and usually are only used on larger keys. Pinch the white stubs at the bottom of the clips together and pull them out of their socket.^[4] Utilise careful and slight movements to foreclose breaking these fragile pieces.

   • You can place hinged keys past looking for white hinges on the bottom of any keycaps you lot couldn't pull off. Usually, the spacebar, shift key, enter key, and tab central will have hinges.^[5]
   • The hinges are slotted at the bottom of the keyboard and are more than easily seen once all other keys are removed.

   Advertisement

1. 1

   Place every keycap and hinged key into a plastic container. Choose a plastic container simply large enough to fit all of your keys — a sandwich or a leftover container should suffice.^[vi] Don't use a plastic purse or run the keys nether h2o individually or you lot won't be able to loosen all the gunk and dust from them.

   • Put a lid on the container to foreclose leaks, and store it in the sink or in a draining area to avoid getting gunk on your flooring.

2. 2

   Fill the plastic container completely with water and let the keys soak. ^[7] Fill the plastic tub of keycaps with warm water all the manner to the top, or at to the lowest degree plenty to cover the top of the pile of caps. Allow the keys soak for at least 5 minutes to loosen anything that dirtied them.^[8]

   • Let the keys soak for longer if there are particularly bad stains on them, upwardly to 30 minutes at most, equally water could loosen the surface layer of paint if left for too long to soak.
   • Yous can also add some mild lather to the water to help remove buildup.

3. 3

   Empty the water and dry off the keycaps individually. Empty the water into the sink with one mitt property the caps in identify to let the dingy water drain out.^[ix] Then, identify a towel over the counter, and dry off each fundamental individually with a cotton swab. When you've finished with a key, place it symbol-side-up on the towel to let it sit down until in that location is no more than water — this tin can take up to an hour.

   • Let your keys sit on the towel until they are completely dry out, even if information technology takes longer than an hr. Any water in your keyboard could damage the internal electronics, and so be absolutely certain in that location are no drops left before you lot reattach them.

4. four

   Dab any stained or persistent gunk with a rubbing alcohol soaked swab. If at that place are any keys that aren't cleaned past a simple soak and dry, you will accept to use a cotton swab with alcohol to fully loosen the cloth. Dip the end of a cotton fiber swab into 70 per centum rubbing alcohol and gently however firmly rub the persistent gunk until it's removed or loosened.^[10]

   • While rubbing alcohol evaporates on its ain, information technology'due south still best to run these keys under water and dry out them again and then your keyboard doesn't smell similar alcohol.^[11] Place them symbol-side-up on the towel when you've cleaned the persistent gunk.

   Advertisement

1. ane

   Utilize dusting spray on the empty keyboard to remove pilus and big pieces. Compressed air spray, or keyboard duster spray, sprays a highly pressurized stream of air that is perfect for cleaning frail electronics. Once the keycaps are removed from the keyboard, spray forth each line, row, and in the cracks and slots of the keyboard to loosen and remove large chunks of gunk and loose hair.^{[12] [xiii]}

   • If you don't take access to keyboard duster spray, yous can utilise a foliage blower or similar high-pressure air bravado tool. Just lay information technology flat on the basis, hold information technology steady with heavy objects, and let the leaf blower loose.^[fourteen]
   • This will spray lots of gunk, dust, hair, and other particles all over the place. If yous want to continue your flooring and desk space make clean, take the keyboard outside to spray it off.

2. 2

   Pour rubbing alcohol into a small dish and dip your cotton wool swabs. It'south hard to get the correct amount of rubbing alcohol on a cotton fiber swab from the canteen, so pour out only enough to barely cover the bottom of a shallow dish, such as a small bowl or a make clean ashtray. Dip your cotton swabs in the alcohol for just a moment.^[xv]

   • If you leave your cotton swabs in the alcohol for too long the cotton fiber volition unravel from the stick and get unusable. Instead, just dip it in for a cursory second, and let any backlog alcohol drip off.

3. three

   Scrub the key areas of the keyboard with the alcohol cotton swabs. Firmly grip a cotton swab and rub each individual key holder and in the grooves between them. It volition take more than a few cotton swabs to go the job washed.^[16] Exist sure to apply pressure equally needed to clean heavy stains. Let the keyboard fully dry out for about an hr before continuing.

   • If you detect any gunk that is peculiarly stuck, endeavour using more than pressure, or apply a small sharp object similar a pocket pocketknife to gently scrap away the outer part of the gunk and and so rub it with booze once more.
   • Be careful around the LEDs and consider using a cotton wool swab that has barely whatever rubbing alcohol on these parts to foreclose electrical harm.

4. iv

   Clean the outside of the keyboard with cotton balls soaked in alcohol. Dip a cotton ball in your rubbing alcohol dish and wipe the outside of the keyboard with information technology — the black portion between the key areas. Exist careful not to soak your cotton balls too much or you lot will drip excess booze into the key area and perchance crusade electronic damage.^[17]

   • Let the keyboard fully dry before standing, and dab away excess alcohol with a dry cloth if necessary.
   • Yous can also utilise regular cleaning wipes for this step, every bit they don't drip and are less likely to cause electronic harm. Opt for booze-infused cleaning wipes to get the all-time clean.

   Advertising

1. 1

   Attach hinged keys past aligning the metal bar and slotting the hinges. On Razer Blackwidow keyboards, the metal bar at the bottom of the cardinal goes backside the LED. Lay the metal bar behind this, then pinch the white stubs together on each side and slot them into the keyboard'due south base of operations. You should hear a click.^[xviii]

2. 2

   Push the keycaps back into their proper place on the keyboard. Reference the photograph you took before to find the proper place for each keycap. Starting from the left of the keyboard, push the keycap gently onto its proper spot until information technology snaps into place.^[19]

   • You won't hear a click, merely the plus-sign-shaped pigsty should fit snugly over the plus-sign-shaped zipper on the keyboard.
   • Practice not reattach any keys that have non yet fully dried, as this could cause impairment to your LEDs or render the central unusable.^[twenty]

3. iii

   Plow on the LEDs to meet if there are any spots that y'all missed. One time all keys are back in identify, plug in your keyboard and plow it on. Enable the LED setting to check for whatever spots yous missed — the light will highlight any obvious places you missed.

   • If y'all see gunk that you missed, only remove keycaps from the area and make clean it with a cotton wool swab again. You don't need to become through the entire cleaning process once again for one mark.^[21]

   Advertizement

Inquire a Question

200 characters left

Include your email accost to become a message when this question is answered.

Submit

Advertisement

• These methods work for both mechanical and non-mechanical varieties of the Razer Blackwidow.

• Clean your Blackwidow at least in one case a calendar week, or when yous commencement to notice gunk building up underneath or on the keys. The LED lights are very good at highlighting dirty areas, which can make your keyboard seem unclean more often.

Advertisement

• Just utilise water on the keycaps, non on the keyboard itself. Rubbing alcohol quickly evaporates, which is useful for cleaning electronics, simply water may seep into the circuitry and destroy your keyboard.

Advertisement

Things Y'all'll Demand

• 70 percentage rubbing alcohol
• Keyboard duster spray
• Cotton swabs
• Cotton balls
• Plastic container

Nigh This Article

Thanks to all authors for creating a page that has been read 41,086 times.

Is this article up to engagement?

Source: https://www.wikihow.com/Clean-a-Razer-Blackwidow-Keyboard

Posted by: robertshispout98.blogspot.com

Share this post